Home » 2DS » Homebrew 3ds 11.8|Are Ninjhax, Freayhax and any R4 card working?
Buy Best R4 Card For 3DS(XL)/2DS/DSi/DS

Homebrew 3ds 11.8|Are Ninjhax, Freayhax and any R4 card working?

Nintendo 3DS system updates to the version 11.8.0-41, so will we update this 3DS firmware to the latest version ? Can we still use a R4 3DS or 3DS flashcard to hack 3DS or New2DS XL 11.8.0-41E ? The CFW or exploit of Ninjhax Luma3ds support pirating 3DS 11.8 without being banned ? Today you will find a solution. 

Is there any homebrew exploit hack 3DS 11.8 ?

There are too many players who want to download a homebrew or exploit to hack 3DS for free games and apps. Now we cannot use Luma3DS on 3DS 11.8, so except this, which 3DS exploit support pirate 11.8.0-41 without risk ?

After tested on the 3DS version 11.8.0-41, here the exploits that you can update your 3DS firmware to V11.8.0:

  • OOThax
  • Steelhax
  • Painthax

News updated: Ninjhax and Freakyhax don’t support 11.8.0-41, players can get the information from the official site:

Can any R4 card install homebrew on 3DS 11.8?

DS Hombrew on 3DS 11.8

The R4 (also known as Revolution for DS/3DS) is a series of flash cartridges for the Nintendo DS and Nintendo 3DS handheld system. It allows ROMs and homebrew to be booted on the Nintendo 3DS/DS handheld system from a microSD card. This allows the user to run homebrew applications, to store multiple games on a single memory card, and to play games that have been backed up by the user. The R4 flashcard’s original developer stopped producing the R4 Card that plays ROMs and homebrew for the Nintendo DS, however, there are a new line of R4 clones that have taken its place, notably the R4 3DS, R4 Gold, R4 DSi and R4 NES, which are used to play ROMs and homebrew from various Nintendo platforms such as the Nintendo 3DS, Nintendo DSi, Nintendo DSi XL and Nintendo Entertainment System. Some of these carts also allow for the flashing of the software ntrboot onto itself, which allows for installing custom firmware (ex. boot9strap and Luma3DS)

Tutorial of run homebrew with r4 card:

  1. Backup the important files in your micro sd to a safe folder. Format your MicroSD card.
  2. Download the latest r4 kernel, now is version V1.84b, if you use the R4i sdhc 3ds rts card. After downloading, extract the file, open, copy and paste all of those files and folders  directly onto the root of your MicroSD card,not under any folder.
  3. Also copy all your download “.nds” homebrew files to the micro sd card. Finally your sd card will has the contents below.
  4. Now put the microSD card into the r4 3ds cartridge. Insert the flashcart into your 3DS/2DS/3DS XL/DSi/DS Lite, load up the flashcart.
  5. Click the “Bomberman Land” to enter in and click the “game” icon.
  6. Choose one homebrew game you want to enjoy and done!

3DS Homebrew on 11.8.0-41

Though we can’t homebrew 3ds via the Ninjhax 2.9 or any other 3ds exploits, via the NTRboot Method, we can install CFW/B9S to our 3DS V11.8 console to launch Homebrews as well. By doing this, we need to have the ntrboothax flashcards like the R4i gold 3ds plus, Ace3ds x and r4i b9s, once the B9S/CFW installed on our 3DS firmware handhelds, just follow the below guide to homebrew 3ds 11.8.0-41 handheld.

What You Need

  • The latest release of Anemone3DS (the .cia file)
  • The latest release of Checkpoint (the .cia file)
  • The latest release of Homebrew Launcher Wrapper
  • The latest release of GodMode9
  • The latest release of DSP1
  • The latest release of FBI (the .cia and .3dsx files)
  • The latest release of ctr-no-timeoffset
  • The latest release of Luma3DS Updater (the .cia file)


Section I – Prep Work

  1. Power off your device
  2. Insert your SD card into your computer
  3. Create a folder named 3ds on the root of your SD card if it does not already exist
  4. Create a folder named cias on the root of your SD card if it does not already exist
  5. Copy ctr-no-timeoffset.3dsx to the /3ds/ folder on your SD card
  6. Copy FBI.3dsx to the /3ds/ folder on your SD card
  7. Copy Homebrew_Launcher.cia to the /cias/ folder on your SD card
  8. Copy lumaupdater.cia to the /cias/ folder on your SD card
  9. Copy FBI.cia to the /cias/ folder on your SD card
  10. Copy DSP1.cia to the /cias/ folder on your SD card
  11. Copy Anemone3DS.cia to the /cias/ folder on your SD card
  12. Copy Checkpoint.cia to the /cias/ folder on your SD card
  13. Create a folder named payloads in the luma folder on your SD card if it does not already exist
  14. Copy GodMode9.firm from the GodMode9 .zip to the /luma/payloads/ folder on your SD card
  15. Copy the gm9 folder from the GodMode9 .zip to the root of your SD card

    Note that, depending on the method used to install boot9strap, your device’s SD card may not have the soundhax-usa-n3ds.m4a, otherapp.bin, or safehaxpayload.bin files from the above screenshot.

  16. Reinsert your SD card into your device
  17. Power on your device

Section II – Updating the System

If, while following a previous version of this guide, you CTRTransfered your New 3DS to 2.1.0, you should now restore your NAND backup before doing this section.

If, before following this guide, you already had an EmuNAND setup and would like to move the contents of your previous EmuNAND to your new SysNAND CFW, now is the time to follow Move EmuNAND before doing this section.

  1. Update your device by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • Updates while using B9S + Luma (what you have) are safe
    • If this gives you an error, set your DNS settings to “auto”
    • If this still gives you an error, follow CTRTransfer, then try updating again

Section III – Homebrew Launcher

  1. Launch the Download Play application
  2. Press (L) + (Down) + (Select) at the same time to open the Rosalina menu
  3. Select “Miscellaneous options”
  4. Select “Switch the hb. title to the current app.”
  5. Press (B) to continue
  6. Press (B) to return to the Rosalina main menu
  7. Press (B) to exit the Rosalina menu
  8. Press (Home), then close Download Play
  9. Launch the Download Play application
  10. Your device should load the Homebrew Launcher
  11. Launch ctr-no-timeoffset from the list of homebrew
  12. Press (A) to set the offset to 0
    • This will set the system clock to match the RTC date&time (which we will set soon)
  13. Press (Start) to return to the Homebrew Launcher
  14. Launch FBI from the list of homebrew

As we know, a R4 3DS flashcart is a cool tool to run free games on your Nintendo 3DS or New2DS XL console without any limits. So which R4 3DS flashcart supports free games on 3DS 11.8 ?

After tested in our 3DS console, it confirmed that all the R4 3DS flashcarts support crack 3DS without any problem, here is a list for you:

  • R4i SDHC 3DS RTS
  • R4i Gold Pro 2018
  • R4i SDHC Dual Core 2018
  • R4i SDHC RTS Lite 2018
  • R4i Gold 3DS Plus
  • R4i B9S 3DS
  • Ace3DS Plus
  • Ace3DS X

Which R4 3DS is the best to hack 3DS 11.8 ?

R4i Gold 3ds Plus and R4i B9s are the best choice, So you could also crack the 3DS under a lower version by installing a CFW. In general, there are two methods to install a CFW, Ntrboothax or Seedminer, of course, a Ntrboot method is easier, because you can use a flashcard that is pre-flashed Ntrboothax, it allows you to install more just a CFW on your console. That is to say that only with a magnet and a flashcard, it is easy to crack a Nintendo 3DS.

R4i b9s

For R4i b9s, it’s a compatible DS / DSi card that is pre-flashed by ntrboot, so you can easily install boot9strap and Luma3DS CFW to your New3DS XL, New3DS, 3DS or 2DS, New 2DS XL console.

  •  Make 3DS / DS games work for free
  • Good value for money
  • Compatible with a latest 3DS update up to 11.8.0-41E / J / U.
  • Region free
  • No risk of being blocked by BigN
  • Play 3DS games in .CIA.

R4i Gold 3DS Plus

This card has two modes supported here: DS mode and Ntr mode, ie it is both compatible with games ds and games 3ds. It allows you to play DS games and run the Ntrboothax. It is pre-flashed with Ntrboot, and you can choose to use it as a normal r4 card or use it for NTRBootHax by changing the position of the console.

  •  NTRBootHax preflashed. You can use the flashcard as a standard R4 3DS or you can use NTRBootHax by simply changing the position of a switch, which is inside.
  • Make 3DS / DS games work for free
  • Compatible with Wood R4
  • Free Region
  • Support for the firmware update
  • Luma3DS CFW support popular
  • Micro SD support up to 32GB
  • No timebomb

Without any R4 card, how to homebrew 3ds 11.8?

Steelhax is an entrypoint for the 3DS and combined with Seedminer it’s a primary one. It enables free Homebrew access not Custom Firmware (CFW). The uses are pretty limited, since many homebrew apps don’t work on any *hax entrypoint. There is a list at the bottom of the with working apps.

If you want a full custom firmware, you should consider a method like Seedminer or ntrboot, here is the user guide video on the below:


If you want to use the r4 card to homebrew 3ds 11.8, where is the legit site to purchase r4 card?  let me introduce to you, we are the professional flashcard reseller and focus on flashcard services. Players can buy any DS/3DS/Switch flashcard on our site, we can provide voucher code and game code to customers. No hesitate, just choose us!

Comments are closed.

Scroll To Top